Fabric Finishing Machines , Rope Open Slitting Squeezing Machine

Knit Fabric Finishing Machine ,Rope Open Slitting Squeezing Machine

     This machine is used before stenter and open width compactor. It can slit the tubular fabrics and then squeezing the water,immerse the softer ,also it can squeeze water,immerse softner for the open width fabrics.

Rope fabrics infeed directly and be slit,automatic detwister(automatically cenering slitting line device is optional),this machine enhance the manufacturing efficient,omit the flow process.so can save time and labour,shorten the production cycle.

I. Technical parameters

II. Machine structure

Rope squeezer

J-box rope squeezer (small padder)

Detect fabric joint and stop, no fabric feeding stop, serious fabric pile sto

Automatic detwister (fix height=6M)

Both hand and automatic operation is allowed, adjustable detwisting sensitivity, precise detwisting, active driving method to reduce tension.

The main machine control device-PLC

PLC communication control, all electrical parts is from Siemens brand, can remote your operating system ( for example, if machine control system have problem, we can remote control software and solve it).

Fabric beater

Can automatic rise when don’t need it.

Centering device

It’s realized by one line of eudipleural infrared and 1pair of correction rolls (covered with roughened rubber). When fabric run off and cover the left side or right side infrared, infrared will give this signal to correction rolls by sensor. Then correction rollers will work and move fabric to center.

Chinese Auto slitting device

Slitting basket diam.800mm, apply to max tubular width 1300mm(open width 2600mm)

Spreading unit

set Spreading rolls :made of stainless steel 304, installed in main machine.

Squeezing padder

Made by professional supplier Complast (Spanish brand). high hardness squeezing roller to get better squeezing & washing effect. Squeezing padder with two covering rollers, pressure obtained through pneumatic bellows. Rollers made in full special steel, rubberized by means of vulcanization. Max pressure 12tons.

Covering rollers Diameter of the all squeezing rollers is 290mm, including 20mm of rubber, thicker & high hard rubber covering to make squeezing effect better. The hardness of roller is 98° and 94° , which is suitable for cotton or rayon fabric and cotton or rayon blend fabric.

Plaiting exit

can adjust plaiting style.

This design has 3kinds of process ways as attached drawing, suitable for different process method and one key to start one process method.

1)Rope open--slitting--plaiting (for dry fabric or dehydrated fabric)

2)Rope open--slitting--squeezing-plaiting ( for wet fabric without dehydration)

3)Rope open--slitting-washing-squeezing-plaiting (for wet fabric that need to wash to remove fabric fluff or other impurity